Engine Control System (VIN A) (1 Of 2)
- Accelerator Pedal Position (App) Sensor Inspection [PYUL]
- Accelerator Pedal Position (App) Sensor Removal/Installation [PYUL]
- Air Fuel Ratio (A/F) Sensor Inspection [PYUL]
- Air Fuel Ratio (A/F) Sensor Removal/Installation [PYUL]
- D-code
- Remove Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Driver's Side Wiper Arm Cover
- Remove Passenger's Side Wiper Arm Cover
- Remove Driver's Side Windshield Wiper Arm And Blade
- Remove Passenger's Side Windshield Wiper Arm And Blade
- Remove Cover Assembly (Driver's Side)
- Remove Driver's Side Front Fender Molding
- Remove Passenger's Side Front Fender Molding
- Remove Cowl Grille
- Remove Side Cowl Grille (Driver's Side)
- Remove Side Cowl Grille (Passenger's Side)
- Remove Windshield Wiper Motor And Link
- Remove Driver Side Strut Tower Bar
- Remove Passenger Side Strut Tower Bar
- Remove Engine Compartment Insulator (Upper)
- Remove Engine Compartment Insulator (RH)
- Remove A/F (Air/Fuel Ratio) Sensor
- Install in Reverse Order of Removal
- Perform Windshield Wiper Arm And Blade Initial Setting
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Barometric Pressure (BARO) Sensor Inspection [PYUL]
- Barometric Pressure (BARO) Sensor Removal/Installation [001]
- D-code
- Verify Viewing Information (BARO Sensor) [PYUL]
- Perform ECM Read
- Open Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove ECM Component
- Install in Reverse Order of Removal
- Perform ECM Write
- Perform Immobilizer System-Related Part Programming
- Inspect for DTCs
- Clear DTCs
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Barometric Pressure (BARO) Sensor Removal/Installation [002]
- D-code
- Verify Viewing Information (BARO Sensor) [PYUL]
- Open Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove ECM Component
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Barometric Pressure (BARO) Sensor Removal/Installation [PYUL]
- Camshaft Position (CMP) Sensor Inspection [PYUL]
- Camshaft Position (CMP) Sensor Removal/Installation [001]
- D-code
- Verify Viewing Information (Camshaft Position Sensor) [PYUL]
- Remove Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Driver's Side Wiper Arm Cover
- Remove Passenger's Side Wiper Arm Cover
- Remove Driver's Side Windshield Wiper Arm And Blade
- Remove Passenger's Side Windshield Wiper Arm And Blade
- Remove Cover Assembly (Driver's Side)
- Remove Driver's Side Front Fender Molding
- Remove Passenger's Side Front Fender Molding
- Remove Cowl Grille
- Remove Side Cowl Grille (Passenger's Side)
- Remove Side Cowl Grille (Driver's Side)
- Remove Windshield Wiper Motor And Link
- Remove Driver Side Strut Tower Bar
- Remove Passenger Side Strut Tower Bar
- Remove Engine Compartment Insulator (Upper)
- Remove Exhaust Camshaft Position Sensor
- Install in Reverse Order of Removal
- Perform Windshield Wiper Arm And Blade Initial Setting
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Camshaft Position (CMP) Sensor Removal/Installation [002]
- D-code
- Verify Viewing Information (Camshaft Position Sensor) [PYUL]
- Remove Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- High Voltage Part Inspection And Removal/Installation Notes
- Remove 150 W Power Supply Unit
- Remove Service Hole Cover (High Voltage Battery)
- Remove Service Plug
- Remove Front Under Cover No. 3
- Remove Floor Under Cover (Left side)
- Remove Rear Under Cover No. 1 (Left Side)
- Remove Terminal Cover (High Voltage Battery Side)
- Perform High Voltage Handling
- Remove Cover Assembly (Driver's Side)
- Remove Driver's Side Wiper Arm Cover
- Remove Passenger's Side Wiper Arm Cover
- Remove Driver's Side Windshield Wiper Arm And Blade
- Remove Passenger's Side Windshield Wiper Arm And Blade
- Remove Driver's Side Front Fender Molding
- Remove Passenger's Side Front Fender Molding
- Remove Cowl Grille
- Remove Side Cowl Grille (Passenger's Side)
- Remove Side Cowl Grille (Driver's Side)
- Remove Windshield Wiper Motor And Link
- Remove Driver Side Strut Tower Bar
- Remove Passenger Side Strut Tower Bar
- Wiring harness clip removal note
- Remove Engine Compartment Insulator (Upper)
- Remove Exhaust Camshaft Position Sensor
- Remove Air Cleaner Component
- Remove ECM Component
- Remove A/C Compressor Bracket (with USA/Canada spec)
- Remove Intake Manifold
- Remove Intake Camshaft Position Sensor
- Install in Reverse Order of Removal
- Perform Precaution After Service
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform Windshield Wiper Arm And Blade Initial Setting
- Camshaft Position (CMP) Sensor Removal/Installation [PYUL]
- Control System Diagram [PYUL]
- Control System Location Index [PYUL]
- Crankshaft Position (CKP) Sensor Inspection [PYUL]
- Crankshaft Position (CKP) Sensor Removal/Installation [001]
- D-code
- Verify Viewing Information (Crankshaft Position Sensor) [PYUL]
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Front Under Cover No. 2
- Remove Front Under Cover No. 1
- Remove Crankshaft Position Sensor
- Install in Reverse Order of Removal
- Crankshaft Position Sensor Learning Value Clearing Procedure [PYUL]
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Crankshaft Position (CKP) Sensor Removal/Installation [002]
- D-code
- Verify Viewing Information (Crankshaft Position Sensor) [PYUL]
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Front Under Cover No. 2
- Remove Front Under Cover No. 1
- Remove Crankshaft Position Sensor
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Crankshaft Position (CKP) Sensor Removal/Installation [PYUL]
- Current Sensor Inspection [PYUL]
- Current Sensor Removal/Installation [PYUL]
- ECM Inspection [PYUL]
- ECM Removal/Installation [001]
- D-code
- Perform Viewing Information Verification
- Perform ECM Read
- Open Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove ECM
- Install in Reverse Order of Removal
- Perform ECM Write
- Inspect for DTCs
- Clear DTCs
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- ECM Removal/Installation [002]
- ECM Removal/Installation [PYUL]
- Engine Coolant Temperature (ECT) Sensor Inspection [PYUL]
- Engine Coolant Temperature (ECT) Sensor Removal/Installation [001]
- D-code
- Verify Viewing Information
- Open Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Front Under Cover No. 2
- Remove Front Under Cover No. 1
- Drain Engine Coolant (Main)
- Remove Engine Coolant Temperature Sensor No. 1
- Install in Reverse Order of Removal
- Add Engine Coolant (Main)
- Perform Engine Coolant (Main) Air Bleeding (With e-SKYACTIV PHEV)
- Inspect For Engine Coolant Leakage
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Engine Coolant Temperature (ECT) Sensor Removal/Installation [002]
- D-code
- Verify Viewing Information
- Remove Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Engine Cooling System Cap
- Remove Front Under Cover No. 2
- Remove Front Under Cover No. 1
- Drain Engine Coolant (Main)
- Remove Passenger Side Front Deflector
- Remove Engine Coolant Temperature Sensor No. 2
- Install in Reverse Order of Removal
- Add Engine Coolant (Main)
- Perform Engine Coolant (Main) Air Bleeding (With e-SKYACTIV PHEV)
- Inspect For Engine Coolant Leakage
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Engine Coolant Temperature (ECT) Sensor Removal/Installation [PYUL]
- Engine Oil Data Reset [PYUL]
- Engine Oil Level Sensor Inspection [PYUL]
- Engine Oil Level Sensor Removal/Installation [PYUL]
- D-code
- Open Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Oil Filler Cap
- Remove Front Under Cover No. 3
- Remove Oil Pan Drain Plug
- Engine oil sampling [PYUL]
- Install Oil Pan Drain Plug
- Remove Engine Oil Level Sensor Short Cord
- Remove Engine Oil Level Sensor
- Install in Reverse Order of Removal
- Engine Oil Filling [PYUL]
- Install Oil Filler Cap
- Inspect Engine Oil Amount
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform 360° View Monitor System Aiming
- Perform Radar Sensor (Front) Aiming (Without Radar Sensor (Front Side))
- Simultaneously Aim Radar Sensor (Front) And (Front Side) (With Radar Sensor (Front Side))
- Engine Oil Pressure Sensor Inspection [PYUL]
- Engine Oil Temperature Sensor Inspection [PYUL]
- Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL]
- D-code
- Remove Capsule Cover
- Perform Precaution Before Service
- High Voltage Part Inspection And Removal/Installation Notes
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove 150 W Power Supply Unit
- Remove Service Hole Cover (High Voltage Battery)
- Remove Service Plug
- Remove Front Under Cover No. 3
- Remove Floor Under Cover (Left side)
- Remove Rear Under Cover No. 1 (Left Side)
- Remove Terminal Cover (High Voltage Battery Side)
- Perform High Voltage Handling
- Remove Front Under Cover No. 2
- Remove Front Under Cover No. 1
- Remove Floor Under Cover (Right side)
- Remove Rear Under Cover No. 1 (Right Side)
- Remove Cooling System Cap (Sub) (PYUL)
- Remove Cooling System Cap
- Drain Engine Coolant (Main)
- Recover Refrigerant
- Remove Cover Assembly (Driver's Side)
- Remove Driver's Side Wiper Arm Cover
- Remove Passenger's Side Wiper Arm Cover
- Remove Driver's Side Windshield Wiper Arm And Blade
- Remove Passenger's Side Windshield Wiper Arm And Blade
- Remove Driver's Side Front Fender Molding
- Remove Passenger's Side Front Fender Molding
- Remove Cowl Grille
- Remove Side Cowl Grille (Passenger's Side)
- Remove Side Cowl Grille (Driver's Side)
- Remove Windshield Wiper Motor And Link
- Disconnect Positive Lead-Acid Battery Terminal
- Remove Driver Side Strut Tower Bar
- Remove Passenger Side Strut Tower Bar
- Remove Engine Compartment Insulator (Upper)
- Remove Air Cleaner Component
- Remove Front Tires (LH)
- Remove Front Tires (RH)
- Remove Driver Side Edge Rubber
- Remove Passenger Side Edge Rubber
- Remove Driver Side Front Over Fender Lower
- Remove Driver Side Front Over Fender Upper
- Remove Driver Side Front Mudguard
- Remove Passenger Side Front Over Fender Lower
- Remove Passenger Side Front Over Fender Upper
- Remove Passenger Side Front Mudguard
- Remove Driver Side Front Deflector
- Remove Passenger Side Front Deflector
- Remove Driver Side Front Splash Shield No. 1
- Remove Driver Side Front Splash Shield No. 2
- Remove Passenger Side Front Splash Shield No. 1
- Remove Passenger Side Front Splash Shield No. 2
- Remove Latch Cover Component
- Remove the front bumper component
- Remove Center Seal Plate
- Remove Bracket
- Remove Intake Air Guide (Upper)
- Remove Driver's Side Seal Plate
- Remove Passenger's Side Seal Plate
- Remove Battery Cap
- Remove Connector Cover
- Remove Tunnel Member
- Remove Middle Pipe
- Remove Insulator (Front No. 1)
- Remove Insulator (Front No. 2)
- Remove Insulator (Front No. 3)
- Remove Insulator (Middle No. 1)
- Remove Insulator (Middle No. 2)
- Remove Insulator Bracket No. 1
- Remove Insulator Bracket No. 2
- Remove Insulator Bracket No. 3
- Remove Rear Propeller Shaft
- Remove The Transverse Member
- Remove Member Bracket (LH)
- Remove Member Bracket (RH)
- Remove Radiator Mount (LH)
- Remove Radiator Mount (RH)
- Remove Inverter Bracket
- Disconnect Motor Cable (Inverter Side)
- Disconnect Quick Release Connector (Fuel System) No. 3
- Disconnect Quick Release Connector (Emission System) No. 1
- Remove Muffler Hanger Bracket
- Perform Pre-engine Component Unloading Procedure
- Lower Engine Component
- Remove Engine Oil Temperature Sensor/Engine Oil Pressure Sensor
- Install in Reverse Order of Removal
- Add Engine Coolant (Main)
- Add Coolant (Sub) [PYUL] (With e-SKYACTIV PHEV)
- Install cooling system cap
- Install cooling system cap (sub)
- Perform Engine Coolant (Main) Air Bleeding (With e-SKYACTIV PHEV)
- Bleed Coolant (Sub) Air (With e-SKYACTIV PHEV)
- Inspect For Engine Coolant Leakage
- Inspect For PHEV Coolant Leakage
- Perform Precaution After Service
- Charge Refrigerant
- Connect Manifold Gauge
- Inspect Refrigerant System Performance
- Inspect Refrigerant Pressure
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform Windshield Wiper Arm And Blade Initial Setting
- Perform 360° View Monitor System Aiming
- Perform Radar Sensor (Front) Aiming (Without Radar Sensor (Front Side))
- Simultaneously Aim Radar Sensor (Front) And (Front Side) (With Radar Sensor (Front Side))
- Inspection Brake Drag
- Fuel Pressure Sensor Inspection [PYUL]
- Fuel Pressure Sensor Removal/Installation [PYUL]
- D-code
- Perform Precaution Before Service
- Remove Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- High Voltage Part Inspection And Removal/Installation Notes
- Remove 150 W Power Supply Unit
- Remove Service Hole Cover (High Voltage Battery)
- Remove Service Plug
- Remove Front Under Cover No. 3
- Remove Floor Under Cover (Left side)
- Remove Rear Under Cover No. 1 (Left Side)
- Remove Terminal Cover (High Voltage Battery Side)
- Perform High Voltage Handling
- Remove Driver's Side Wiper Arm Cover
- Remove Passenger's Side Wiper Arm Cover
- Remove Driver's Side Windshield Wiper Arm And Blade
- Remove Passenger's Side Windshield Wiper Arm And Blade
- Remove Driver's Side Front Fender Molding
- Remove Passenger's Side Front Fender Molding
- Remove Cowl Grille
- Remove Side Cowl Grille (Passenger's Side)
- Remove Side Cowl Grille (Driver's Side)
- Remove Windshield Wiper Motor And Link
- Remove Driver Side Strut Tower Bar
- Remove Passenger Side Strut Tower Bar
- Remove Engine Compartment Insulator (Upper)
- Remove Air Cleaner Component
- Remove ECM Component
- Remove A/C Compressor Bracket (with USA/Canada spec)
- Remove Intake Manifold
- Remove High Pressure Fuel Pipe
- Remove Fuel Distributor
- Install in Reverse Order of Removal
- Perform Precaution After Service
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform Windshield Wiper Arm And Blade Initial Setting
- Fuel Tank Pressure Sensor Inspection [PYUL]
- Fuel Tank Pressure Sensor Removal/Installation [PYUL]
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Rear Over Fender (LH)
- Remove Rear Splash Shield (LH)
- Remove Main Silencer
- Remove Insulator (Rear)
- Remove Rear Bumper Bracket (LH) (With Rear Bumper Bracket (LH))
- Disconnect Quick Release Connector (Emission System) No. 3
- Disconnect Quick Release Connector (Emission System) No. 7
- Disconnect Quick Release Connector (Emission System) No. 2
- Disconnect Quick Release Connector (Emission System) No. 8
- Remove Fuel Tank Pressure Sensor
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Fuel Vapor Temperature Sensor Inspection [PYUL]