Vehicle Dynamic Systems
- Specifications
- Description And Operation
- Diagnostic Tests
- Anti-Lock Control
- Notes
- Principles of Operations
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC B1483 - Brake Pedal Input Open Circuit
- Pinpoint Test B: DTC B1676 - Battery Pack Voltage Out of Range
- Pinpoint Test C: DTCs C1145, C1155, C1165 and C1175 - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test D: DTCs C1233, C1234, C1235 and C1236 - Wheel Speed Sensor Signal Fault
- Pinpoint Test E: DTC C1095 - ABS Hydraulic Pump Motor Circuit Failure
- Pinpoint Test F: The Yellow Anti-Lock Brake System (ABS) Warning Indicator is Always On
- Pinpoint Test G: Spongy Brake Pedal with No Warning Indicator
- Pinpoint Test H: Poor Vehicle Tracking During Anti-Lock Function
- Pinpoint Test I: DTC C1093 - Traction Control Disable Switch Circuit Failure/The Traction Control System Cannot Be Disabled/Enabled or the Traction Control Warning Indicator is Always On
- Anti-Lock Control
- Removal And Installation