Service Precautions

Observe the following precautions when working on air bag systems:

• When working around steering column and before any repairs are performed, disable SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
• Always ensure the radio is off before disconnecting battery. This will prevent damage to radio microprocessor.
• Before performing any body damage straightening or electrical arc-welding, disable SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM  . Disconnect front sensors.
• Wait at least 5 minutes after SRS is disabled before servicing system as system maintains SRS voltage at least that long. Servicing SRS before 5-minute period may cause accidental air bag deployment and personal injury.
• Always wear safety glasses and gloves when handling a deployed air bag module. Air bag module may contain sodium hydroxide deposits which are irritating to the skin.
• Always use caution when handling any sensors. Never strike or jar sensors. All sensors and mounting bracket bolts must be torqued to specification to ensure proper sensor operation. See TORQUE SPECIFICATIONS  .
• Never use any SRS component that has been dropped from 3 feet or more.
• To avoid air bag deployment when trouble shooting SRS, DO NOT use self-powered electrical test equipment such as battery-powered or AC-powered voltmeter, ohmmeter, etc. DO NOT perform any repair on any portion of SRS wiring circuit.
• Always handle air bag module with trim cover away from your body. Always place air bag module on workbench with trim cover up, away from loose objects.
• Never expose SRS components to temperatures greater than 212°F (100°C).
• Never expose any SRS system components to cleaning agents such as solvents, gasoline, lye, etc.